Skip to product information
1 of 1

Jabiru Valve Guide Gauges & Reamer Kit

Jabiru Valve Guide Gauges & Reamer Kit

P/No: VGT

Regular price Contact us for price
Regular price Sale price £0.00
Sale
Shipping calculated at checkout.

Out of stock

We now have in stock valve guide reamers and go/no go sets to measure your valve guides Go/no go gauges are the easiest way to check your valve guides are within tolerance. The set includes one 7.04mm gauge and one 7.06mm gauge. The valve guide reamer will ensure that when used on tight (undersized) guides, it will leave a perfect 7.04mm guide. 7.04mm is the minimum bore size for valve guides. Anything less will heighten the risk of valve grab (sticky valves), which can lead to valves not sealing correctly, and if left unmaintained, will possibly cause the valve to ‘stick’ in the guide and collide with a piston. We occasionally hear of maintainers and owners using the “calibrated wiggle test” to measure valve guides. This inaccurate method can possibly result in an engine being destroyed or valves guides being replaced when not necessarily needed. To assist owners and maintainers we have sourced this simple set of inexpensive tools to make the job easier for appropriately qualified people to use.
View full details